Wolframových elektrod, wolframových elektrod
Wolfram elektrode, wolframelektroder
Wolfraam elektrode, Wolfram elektroden
Tungsten electrode, Tungsten electrodes
Électrode de tungstène, électrodes de tungstène
Wolframelektrode, Wolfram-Elektroden
Elettrodi di tungsteno, elettrodi di tungsteno
Wolfram elektrode, Tungsten elektroder
Eletrodo de tungstênio, eletrodos de tungstênio
Electrozi wolfram, electrozi wolfram
Вольфрам электрода, вольфрамовые электроды
Electrodo de tungsteno, electrodos de tungsteno
Volfram elektrod, volframelektroder
Tungsten elektrot, Tungsten elektrot
 
Position:Home>>Tungsten electrodes
Tungsten electrodes

Tungsten electrodes

Electrode material, diameter, grind angle, and tip diameter (flat) vary according to each welding application. Charts and guides are available identifying amperage ratings for a variety of grind angles and tip diameters. Where available, use your welding equipment manufacturer's recommendations as a starting point. In the absence of that, the information below offers some general rules of thumb to follow and may be modified according to the specific application.

Different electrode materials offer various advantages in arc starting and electrode life. The following are the most commonly used electrode materials:

Tungsten electrode material
1, Diameters: 1.0mm-10.0mm
2, Length: 150mm, 175mm
3, We also accept orders of special specification Tungsten electrode.
Tungsten electrode product is the traditional and advantages product in our Factory. In recent years, the factory began to the tungsten electrode product research and development
Thoriated tungsten electrode
Model Number: WT10, WT20, WT30, WT40
Diameters: 1.0mm-10.0mm
Length: 150mm, 175mm
Property: Easy to get up the arc, in the welding process unceasingly arches.
Cerium tungsten electrode
1, Trade mark: WC20
2, Added impurity: CeO2
3, Impurity quantity: 1.8~2.2%
4, Diameters: 1.0mm-10.0mm, Length: 150mm, 175mm
5, Electric discharged power: 2.7~2.8
6, Property: Cerium-Tungsten is the first choice for replacing thoriated tungsten electrode under the condition of low DC
Yttrium tungsten electrode
Model Number: WY20;
Color: Green
Diameters: 1.0mm-12.0mm
Length: 150mm, 175mm
Property: Yttrium-Tungsten Electrode: Mainly applied in military and aviation industry.
Lanthanated tungsten electrode
1, Model Number: WL10, WL15, WL20
2, Diameters: 1.0mm-10.0mm
3, Length: 150mm, 175mm
4, Property: Another advantage of Lanthanated Tungsten is being able to bear high current and having the lowest burn-loss rate.
Compound tungsten electrode
Model Number: WX
Diameters: 1.0mm-10.0mm
Length: 150mm, 175mm
Property: It has good welding performance and it is better than WT20
Zirconiated tungsten electrode
Model Number: WZ
Diameters: 1.0mm-10.0mm
Length: 150mm, 175mm
Property: Zirconiated Tungsten electrode is excellent for AC welding due to favorable retention of balled end
Pure tungsten electrode
Model Number: WP
Color: Green
Diameters: 1.0mm-12.0mm
Length: 150mm, 175mm
Quality of surface: Ground finish, polish finish
Property: Pure Tungsten electrode contains a minimum of 99.5wt-% Tungsten with no other alloying elements
Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : sales@chinatungsten.com
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved