slitiny wolframu bar, bary slitiny wolframu
Wolfram legeret bar, wolfram legeret barer
Wolfram gelegeerd bar, wolfraam legering bars
tungsten alloy bar, tungsten alloy bars
alliage de tungstène bar, barres en alliage de tungstène
Wolframlegierung bar, Wolfram Legierung bars
lega di tungsteno bar, bar in lega di tungsteno
Wolfram legering bar, Wolfram legering barer
Liga de tungsténio bar, bares de ligas de tungstênio
Wolfram aliaj bara, Wolfram aliaj baruri
сплавов вольфрама бар, бары сплавов вольфрама
aleación de tungsteno de barras, barras de aleación de tungsteno
volfram legering bar, volfram legering barer
Tungsten alaşım bar, tungsten alaşımlı çubuklar
 
Position:Home>>Tungsten alloy
Tungsten alloy

Tungsten alloy bar

Tungsten alloy bar Tungsten alloy bar Tungsten alloy bar

Tungsten Alloy Bar Introduction

1, Width×Length: (2.0-100.0mm)×(2.0-100.0mm)
2, High: 50-1000mm
3, Density: 15.8-18.75 g/cm3
4, W content: 85-99%
5, Composition: W-Ni-Fe, W-Ni-Cu
6, Surface: Sintering surface, Forged surface, Ground surface

Tungsten alloy bar is consist of 85-99% tungsten with balanced commonly nickel and iron or copper. The alloys are made by liquid-phase sintering to give a structure consisting of almost pure tungsten particles in a matrix of the alloy elements. Tungsten heavy alloy, with densities between 15.8 and 18.75 g/cm3, represent the heaviest materials generally available to the engineer. It has excellent radiation resistance, thermal and electric conductivities, corrosion resistance and machinable.

Tungsten alloy bar is plays important role in manufacturing of collimator for nuclear medicine, nuclear research, geologging and homeland security. These materials provide reliable protection against X-rays and gamma radiation.

The Advantage of Tungsten Alloy

  • Able to absorb the rays: The ability is so strong that it’s about 30-40% higher than lead;
  • High Thermal conductivity coefficient: 5 times that of die steel;
  • Low Thermal expansion coefficient: Only 1/2-1/3 of that of iron or steel;
  • With good weld-ability and process-ability.

Tungsten Alloy Data Sheet

Type

Density (g/cm³)

Tensile strength (MPa)

Elongation

Hardness (HRC)

85W-10.5Ni-4.5Fe 15.8-16.0 700-1000 20-33 20-30
90W-7Ni-3Fe 16.9-17.1 700-1000 20-33 24-32
90W-6Ni-4Fe 16.7-17.0 700-1000 20-33 24-32
91W-6Ni-3Fe 17.1-17.3 700-1000 15-28 25-30
92W-5Ni-3Fe 17.3-17.5 700-1000 18-28 25-30
92.5W-5Ni-2.5Fe 17.4-17.6 700-1000 25-30 25-30
93W-4Ni-3Fe 17.5-17.6 700-1000 15-25 26-30
93W-4.9Ni-2.1Fe 17.5-17.6 700-1000 15-25 26-30
93W-5Ni-2Fe 17.5-17.6 700-1000 15-25 26-30
95W-3Ni-2Fe 17.9-18.1 700-900 8-15 25-35
95W-3.5Ni-1.5Fe 17.9-18.1 700-900 8-15 25-35
96W-3Ni-1Fe 18.2-18.3 600-800 6-10 30-35
97W-2Ni-1Fe 18.4-18.5 600-800 8-14 30-35
98W-1Ni-1Fe 18.4-18.6 500-800 5-10 30-35
90W-6Ni-4Cu 17.0-17.2 600-800 4-8 25-35
93W-5Ni-2Cu 17.5-17.6 500-600 3-5 25-35

Note: The specification and composition of tungsten alloy bar can be self-defined by customer.

 

Related Links

Copper Tungsten Rod
Tungsten Electrode
Material Safety Data Sheet of Tungsten Alloy
Material Safety Data Sheet of Tungsten Alloy (PDF)
Catalog of Tungsten Alloy Products (PDF)

Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : sales@chinatungsten.com
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved