Části a slitiny wolframu, část slitiny wolframu
Wolfram legeret dele, Tungsten legeret del
Wolfraam aluminium delen, Tungsten alloy deel
Tungsten alloy parts, Tungsten alloy part
Pièces en alliage de tungstène, partie en alliage de tungstène
Wolfram Legierung Teile, Wolfram Legierung Teil
Parti di leghe di tungsteno, parte in lega di tungsteno
Wolfram legering deler, Tungsten legering del
Partes de ligas de tungstênio, parte de ligas de tungstênio
Wolfram aliaj piese, Tungsten aliaj parte
Вольфрам сплава части, вольфрам сплава
Partes de aleación de tungsteno, parte de aleaciones de tungsteno
Volfram legering delar, Tungsten legering del
Tungsten alaşımlı parçaları, Tungsten alaşım bölümü
 
Position:Home>>Tungsten alloy
Tungsten alloy

Tungsten alloy parts

Tungsten alloy parts Tungsten alloy parts Tungsten alloy parts

Tungsten alloy features

1, Suitable for highly complex geometric shapes
2, Most parts require little or no secondary machining process
3, High level of surface finish as processed, of 32 rms or better
4, Tight tolerances of up to forms complex metal shapes without the need for machining.

The tungsten alloy part adopts the technology of metal injection molding (MIM).

Metal injection molding offers a manufacturing capability for producing complex shapes in large quantities. The process utilizes fine metal powders (typically less than 20 micrometers) which are custom formulated with a binder (various thermoplastics, waxes, and other materials) into a feedstock which is granulated and then fed into multiple cavities of a conventional injection molding machine. After the “green” component is removed, most of the binder is extracted by thermal or solvent processing and the rest is removed as the component is sintered (solid-state diffused) in a controlled atmosphere furnace. The MIM process is very similar to plastic injection molding and high-pressure die casting, and it can produce much the same shapes and configuration features. However, it is limited to relatively small, highly complex parts that otherwise would require extensive finish machining or assembly operations if made by any other metal forming process.
Any small shape which can be envisioned as a plastic molded part is now available to the designer in a variety of standard or custom metal formulations through his net shape forming process. Material properties can be specifically tailored to meet non-standard requirements.

Tungsten Alloy Data Sheet

Type

Density (g/cm³)

Tensile strength (MPa)

Elongation

Hardness (HRC)

85W-10.5Ni-4.5Fe 15.8-16.0 700-1000 20-33 20-30
90W-7Ni-3Fe 16.9-17.1 700-1000 20-33 24-32
90W-6Ni-4Fe 16.7-17.0 700-1000 20-33 24-32
91W-6Ni-3Fe 17.1-17.3 700-1000 15-28 25-30
92W-5Ni-3Fe 17.3-17.5 700-1000 18-28 25-30
92.5W-5Ni-2.5Fe 17.4-17.6 700-1000 25-30 25-30
93W-4Ni-3Fe 17.5-17.6 700-1000 15-25 26-30
93W-4.9Ni-2.1Fe 17.5-17.6 700-1000 15-25 26-30
93W-5Ni-2Fe 17.5-17.6 700-1000 15-25 26-30
95W-3Ni-2Fe 17.9-18.1 700-900 8-15 25-35
95W-3.5Ni-1.5Fe 17.9-18.1 700-900 8-15 25-35
96W-3Ni-1Fe 18.2-18.3 600-800 6-10 30-35
97W-2Ni-1Fe 18.4-18.5 600-800 8-14 30-35
98W-1Ni-1Fe 18.4-18.6 500-800 5-10 30-35
90W-6Ni-4Cu 17.0-17.2 600-800 4-8 25-35
93W-5Ni-2Cu 17.5-17.6 500-600 3-5 25-35

Note: The specification and composition of tungsten alloy parts can be self-defined by customer.

 

Related Links

Tungsten Bucking Bars
Tungsten Parts
Material Safety Data Sheet of Tungsten Alloy
Material Safety Data Sheet of Tungsten Alloy (PDF)
Catalog of Tungsten Alloy Products (PDF)

Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : sales@chinatungsten.com
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved